Vicon Andex Rakes

Hard working & hard wearing, single rotor & twin rotor

Vicon’s range of Andex rakes offer models for all terrains and conditions, from compact single rotors starting at 3.2m, up to the heavy duty, four rotor ProLine versions, which can comfortably operate at 15m wide. Each one is designed for a long lifetime and maximum productivity, and several incorporate Isobus compatibility.

With the multi-rotor rakes, there are both centre swath and side delivery options, the latter also providing the option of two smaller swaths, with the VARIO independent rotors. In terms of performance, Vicon rate their twin-rotor ProLine rake alongside their competitors’ four rotor machines, so you too can be confident in their ability.

POAIn StockUsed

VICON, Tedder

6 Rotors, Exceptional Condition

Andex 323, 353, 394, 423T & 434 Compact Rakes

Five compact single rotor rakes, built to deliver considerable working width on low Hp tractors, from 3.2-4.3m. With the option of pivoting, fixed three-point linkage mounting, and a trailed version, there’s a model to suit your needs. All rakes (except Andex 423T) have mechanical height adjustment via a crank, for adjusting to individual field conditions.

  • Compact, light design can be operated by smaller tractors
  • CompactLine gearbox with cam discs & tine arm bearing running permanently in oil
  • Curved tine arms for cleaner raking performance and better swath formation
  • High number of options available, such as tandem axles, oscillation dampers and a third wheel

Andex 724 & 764 rakes

Two cost-effective two rotor rakes with strong frames. Get a nice, even centre swath, from raking widths of between 7.2 & 7.6 m. Andex 724 Hydro is fitted with hydraulically operated axles on the main frame, to lift or lower the machine during transport & operation. This feature reduces transport height by 45cm, making it as low as 3.45m in total.

  • Working widths of 7.2 and 7.6m
  • CompactLine maintenance-friendly gearbox
  • TerraLink Quattro for perfect ground followings
  • Hydraulic adjustable working width
  • Active wheel steering with 80° turning angle for easy manoeuvrability

Andex 804, 844 & 904 Hydro Rakes

Designed for the toughest conditions, they feature a high performance oilbath gearbox & strong carrier frame. Newly designed wheel axles allow for a transport height of less than 4m, even with tine arms mounted.

  • Working widths of 8.0, 8.4 and 9.0m
  • ProLine oilbath gearbox
  • TerraLink Quattro for perfect ground followings
  • Hydraulically adjustable working & swath width
  • Active wheel steering with 80° turning angle for easy manoeuvrability

Andex 1104 Twin Rotor Rake

Twin rotor rake built to compete in the high performance segment, normally covered by more expensive 4 rotor rakes. The Andex 1104 offers easy operation, excellent manoeuvrability and a heavy duty design. With 15 double tangential tine arms and 4 double tines per arm, the Andex

  • 1104 is well equipped for maximum raking performance.
  • Working width of 9.2-11.0m
  • ProLine oilbath gearbox
  • TerraLink Quattro for perfect ground following
  • Hydraulic adjustment of working width width
  • Hydraulic height adjustment of the rotors
  • Active wheel steering, allowing sharp turns on headlands & during transport

Found what you’re looking for?

Visit our depot, or call us on
01503 240 171